Completing Inspection from Phone/Tablet

You can start the inspection from within the property's sections page, or from within the task created for the inspection. 

Once you are in the inspection, the system will guide you through the process. You will take a picture using your device's camera, select from your photo library, or select from photos in the File Library.

Overview Photos -  These are meant to be 4 corner shots of the roof (facing inward) to bring a general overview of the roof to your client.

Observation Photos/Video - These are meant to be additional photos with brief comments that demonstrate the general condition of the roof (which could range from third-party issues, roof details, etc). You can also take/upload a short video to this section.

Composition - This section is meant for core cuts, surface photos, or pull tests. You can identify the layers of the roof in this section.

Issues on Section - This is where you will put all repairs that need to be made. You will:

• Upload a picture (via camera, device gallery, or file library)
• Search/select the issue from the repair library
• Enter the quantity
• Check the box yes or no to indicate if water can penetrate the roof (this determines if the repair is emergency or proactive), click "Next"
• Plot the location of the issue
• Click save and continue this process until all issues on this section are documented.

Grading - In this section, you will grade each of the different roof components (Membrane, Flashings, & Sheet Metal) which will then populate an overall grade and an estimated year for replacement.

Recommendations - This section is meant for you to give your suggestions on what your client should do with their roof. You can also enter a BUDGETARY figure for replacement (this is not a firm number, just to give your client an idea of the approximate cost for replacement). 

Once you are finished with this section click the orange "Complete Section" button. You will then either repeat this process for the other sections if there are any, or if you are done with this inspection you will click the orange "Submit Inspection" button.

Once you have submitted the inspection, whoever is set up for property approval will receive a text notification letting them know they have a new inspection to review.

**NOTE: You can bounce back and forth throughout the steps by tapping on the bottom icons.